v

Beam Engine Kit Type S with onboard Steam Plant

Beam Type S Engine shown below with optional Motorisation Kit

 

Beam Type S Live Steam Video

Works at low pressure (less than 1.0 psi)

For Live Steam Operation use the onboard Steam Plant

for Display or Exhibition

use our new optional motorisation kit

or use an Aquarium Pump (min. capacity 200 L/h)

It will also work if you just blow into the steam inlet pipe!

A single acting slide valve engine.

Watts Parallel Motion

Steam Regulator for Speed Control.

The finished engine is 8" x 8 " x 5" high (203mm x 203mm x 125mm)

Mounted on an attractive hardwood base (Supplied pre-finished and varnished).

Flywheel diameter 3.25". Bore 0.75". Stroke 1.0".

Comprehensive instruction booklet.

No machining required just normal hand tools.

Kit Contents

The Motorisation Kit is easily fitted to the Engine Model.

It uses two 1.5volt AA Batteries (not supplied)

q

Copyright © Sussex Steam Co. 2005 - All Rights Reserved